SCSI Connector Manufacturers

 Frank Guidone, CEO SCSI Connector Manufacturers Sensors, USA, said: "The sensor market is developing very strongly. The number of applications in each product unit and the number of parts in new equipment are increasing year by year. We are very happy to use TE's unparalleled market resources and capabilities to allow our products to serve customers all over the world.

Our customers and employees are looking forward to cooperating with TE's seamless integration has become the customer's preferred supplier of sensing demand technology. "The sensor market is a discrete, large-scale and fast-growing market. The acquisition of MEAS will increase TE's potential market by nearly US$40 billion. TE will have a unique scale in this market. The combination of TE's sensor business and MEAS's wide range of sensors and sensor systems makes TE one of the world's largest sensor manufacturers.

Wide vacuum pick-and-place area is suitable for automated circuit board placement, even if the width is narrow, it will not affect Ando added: "Molex will continue to expand the SlimStack SSB series in the future, and will Introduce more models, including different stacking heights, EMI protection and shielding models, and models with power nail "armor" features." Hall 11 Connector/Plug Hall Connector, Connection Connectors, heavy-duty connectors, sockets, plugs, ...

The plug side adopts a structure that eliminates foreign matter (wiping effect) by increasing the concentrated load, ensuring excellent contact reliability. In addition, fixed metal parts are used to strengthen the peel strength from the substrate. The rated current of the new product is DC 0.3A/terminal, the rated voltage is DC 60V/terminal, and the withstand voltage is AC 250Vrms/min.

The operating temperature range is -55℃～＋85℃. The sample price of the 56-pin product is 100 yen per set. In addition, Kyocera will exhibit the 5853 series at the "CEATEC JAPAN 2014" held at the Makuhari MESSE International Convention Center from October 7th to 11th, 2014. (Reporter: Ikutaro Kojima, "Nikkei Electronics") Hall 11 Connectors / Plugs Hall 11 Connectors, Connectors, Heavy Duty Connectors, Sockets, Plugs, ...

Megosztás a facebookon

plug in terminal block Suppliers

it is often around plug in terminal block Suppliers or below. 3. The RS-485 interface is a combination of balanced driver and differential receiver, which has good anti-noise interference. 4. The standard value of the maximum transmission distance of the RS-485 interface is 1200 meters (at 9600 bps), which is actually up to 3000 meters.

The RS-485 interface allows the connection of up to 128 transceivers on the bus, that is, the RS-485 has multiple Machine communication capability, so that users can use a single RS-485 interface to easily establish a device network. Because the RS-485 interface has good anti-noise interference, long transmission distance and multi-station capability, the above-mentioned advantages make it the preferred serial interface. Because the half-duplex network composed of RS485 interface generally only needs two signal wires, the RS485 interface adopts shielded twisted pair transmission.

The international standard of RS-485 does not stipulate the interface connector standard of RS485, so you can use terminal blocks or connectors such as DB-9 and DB-25. The Boss RS-485 interface is a de facto industry standard. 5. When using the RS485 interface, how to consider the length of the transmission cable? Answer: When using the RS485 interface, for a specific transmission line, the maximum cable length allowed for data signal transmission from the generator to the load is a function of the data signal rate. This length data is mainly limited by the influence of signal distortion and noise. .

The relationship curve between the maximum cable length and the signal rate is obtained when a 24AWG copper-core twisted-pair telephone cable (with a wire diameter of 0.51mm) is used, the bypass capacitance between the lines is 52.5 PF/M, and the terminal load resistance is 100 ohms. (Quoted from Appendix A of GB11014-89). When the data signal rate drops below 90Kbit/S, assuming the maximum allowable signal loss is 6dBV, the cable length is limited to 1200M. In fact, it is completely possible to obtain a larger cable length in practical use. When using cables with different wire diameters.

 

 

Megosztás a facebookon

Universal Screw Terminal Blocks

Although the market price of Universal Screw Terminal Blocks is very high, but because of its excellent performance, more and more applications, the consumption growth rate is greater than 20% (the consumption growth rate in the Asia-Pacific region even reaches 30%), this is other engineering plastics Incomparable.

At the same time, the production of LCP also has a huge profit return. Therefore, the major LCP manufacturers have invested heavily in manpower and material resources for further research and development. However, in an environment of fierce competition, some production facilities are relatively small in scale and relatively competitive in the market. Weak LCP producers are also considering withdrawing from the competition.

Therefore, the total global LCP production capacity will not increase much in recent years, and may even decrease slightly, but consumption will still maintain a strong development momentum. 2 2 Main Application areas (1) Film material oriented LCP has excellent barrier properties and can be made into various packaging films.

This is a new direction of LCP research in recent years. LCP is used as a barrier layer in food packaging, and its oxygen barrier and moisture barrier effects Obviously, under high humidity conditions, the LCP/PET or LCP/PP sandwich structure has a very good oxygen barrier effect. When the food is stored under refrigeration, the shelf life can reach more than 1 a. Through appropriate molecular design and film making technology, 

Megosztás a facebookon

China Female Header

The following is the China Female Header of mold temperature on crystallinity. The highest resin crystallinity is 65%. PPS products will also increase crystallinity after annealing. Annealing conditions vary with the wall thickness of the product, generally 200°C-240°C, 2-4 hours. Annealed products have stable characteristics due to the elimination of internal residual stress (increased dimensional stability and screw retention after annealing). However, due to crystallization during annealing, the product shrinks due to crystallization, so you must first consider annealing And the resulting size changes.

Generally, as the crystallization of the resin increases, the physical properties of the product change as follows: (1) Heat distortion temperature increases (high temperature characteristics) (2) Rigidity increases (modulus of elasticity increases) (3) Tensile strength at room temperature is slightly lower, but The tensile strength in high temperature cloud gas is improved. (4) In cloud gas, the flexural strength below 95°C decreases, but the flexural strength increases above 95°C. (5)

Reduced impact strength (6) Excellent creep resistance due to dimensional change over time (7) Improved shear strength (8) The surface gloss of the product becomes better (but if the annealing treatment deteriorates) (9) The surface hardness is slightly Increased (10) Increased shrinkage rate, improved stability at high temperature dimensions (11) Reduced linear thermal expansion coefficient 3.4 Recycled materials

Now the research in the field of TLCP in China has a new development direction, that is to synthesize multiple liquid crystal copolyesters, and use the characteristics of various monomers in the multiple liquid crystal copolyesters to complement each other to further balance the performance of TLCP. In order to obtain LCP with more comprehensive performance. (2) 

Megosztás a facebookon